ZYCOO SIP Safety Intercom IA03 and IV03 is compact PoE enabled intercom devices equipped with a PTT (Press to Talk) button. IA03 is mainly used for voice intercom but can be linked with an external IP camera for video intercom. IV03 can do video intercom with its built-in HD camera. IV03 can do video intercom with its built-in HD camera. It can be easily integrated with any SIP server for full-duplex communication. Additionally, access control is enabled.

ZYCOO SIP Safety intercom IA03 and IV03 are SIP enabled intercom devices which can be used for consulting and SOS applications. By default, IA03 can be used as a voice intercom and IV03 has a built-in HD camera which can support video intercom. If there is an existing IP camera, this can be linked with IA03 for video intercom. IP cameras which support RTSP, such as Dahua and Hikvision IP cameras can be linked with IA03. Based on SIP and with PoE support, the installation of the IA03 and IV03 only requires a PoE enabled network cable, no power supply and extra wiring is required. Each of the intercom devices has been equipped with a programmable dial button, any desired number can be preconfigured. By pressing the button users can talk with the target number in hands-free mode. IA03 and IV03 have been equipped with digital level input for connection of sensors, and also with a relay switch which can be used to connect door magnet. The action (open/close the door) of the relay switch can be controlled by DTMF signal, intercom call status and the sensor input signal. In addition to working with ZYCOO IP Audio Center, the IA03 and IV03 intercoms can be also integrated with third-party SIP servers and the features detailed above are still applicable. 

By default, the SIP safety intercom devices’ IP assignment has been configured as DHCP. Please ensure there’s DHCP server available in the LAN where the SIP safety intercom devices are installed. If there’s no DHCP server available or DHCP fails, you’ll have to use the failover IP address 192.168.1.101 to access the web management interface. Press and hold the call button for 5 seconds then release, the device will announce its IP address. Input the IP address in the browser address bar to open the web management interface of the SIP safety intercom.

There are three (3) SIP accounts under the SIP Settings, one (1) primary and two (2) secondary for the use of different SIP accounts to proceed various tasks. If the current device needs to cooperate with the ZYCOO IP Audio Center, please turn on the ‘ZYCOO IP Audio Center’ option. P2P stands for Peer to Peer. In a P2P network, the peers are connected to each other via the Internet, files can share, or peers can call each other directly between systems on the network without the need of a central server.

 Speaker Volume:

The default speaker volume is 7, adjustable range is 0 ~ 9.

MIC AGC: When this setting is enabled, the system will automatically adjust the microphone volume according to the environment.

User able to adjust the microphone volume manually when this setting is disabled.

Microphone Volume: The default microphone volume is 7, adjustable range is 0 ~ 9. 

AGC Min Volume: This setting represents the minimum value of the automatic gain control.

AGC Max Volume: This setting represents the maximum value of the automatic gain control. 

Key Beep: Enable/Disable the beep sound from key button. 

Music Auto Resumes: The previous music tasks will automatically resume when the device is restarted or reconnected to the network.

Audio Compression

• Audio Codecs: G.722, G.711 A-law, G.711 U-law, G.729
• Music Streaming: MP3 sampling rate 8-48KHz, bit rate 64-320kbps, mono or stereo

Video

• Camera: 1920*1080@20fps, 1280*720@25fps
• Video Codec: H.264

Network

• Network Interface: 10/100Mbps, PoE IEEE802.3at
• Protocols: SIP(RFC3261), HTTP, TCP/IP, SSL, DNS, SNTP, NTP, RTSP, RTP, RTCP, TCP, UDP, MQTT, ICMP, DHCP, ARP, SSH

 Administration

• Configuration: Web interface or auto-provisioning server
• Provisioning method: MQTT IoT Protocol
• Memory:128MB RAM, 256MB Flash

Mechanical Properties

• Power input: PoE IEEE802.3at or DC12V1A
• Weight: 476g
• Dimension: 164*80*44mm
• Operating temperature: -20°C ~ 50°C (-4°F ~ 122°F)